M608c
Guidelines for safe and efficient use 101
This is the Internet version of the user's guide. © Print only for private use.
DAMAGES OF ANY NATURE
WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR
COMMERCIAL LOSS; TO THE FULL
EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
Some countries/regions/states do not allow the
exclusion or limitation of incidental or
consequential damages, or limitation of the
duration of implied warranties, so the preceding
limitations or exclusions may not apply to you.
The warranty provided does not affect the
consumer's statutory rights under applicable
legislation in force, nor the consumer’s rights
against the dealer arising from their sales/
purchase contract.
** In some countries/regions additional information
is requested. If so, this is clearly shown on the valid
proof of purchase.
FCC Statement
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2) This
device must accept any interference received,
including interference that may cause undesired
operation.
Bluetooth wireless technology
Bluetooth Qualified Design ID is B011112.
Memory Stick Micro™ (M2™)
The medium indicating “class0” is for use with
the bundled product. Certain functions might
be limited when using “Class 0” medium with
any other product.
Declaration of Conformity
We,
Sony Ericsson Mobile Communications AB
of
Nya Vattentornet
S-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony Ericsson type FAB-1022011-BV
and in combination with our accessories, to which
this declaration relates is in conformity with the
appropriate standards 3GPP TS 51.010-1,
EN 301908-1, EN 300328, EN 301489-7,
EN 301489-17, EN 301489-24, EN 60950,
following the provisions of Radio Equipment and
Telecommunication Terminal Equipment directive
99/5/EC
with requirements covering EMC directive
89/336/EEC
, and Low Voltage directive
73/23/EEC
.
Shoji Nemoto
Head of Product Business Unit GSM/UMTS
We fulfil the requirements of the R&TTE Directive
(99/5/EC)
.
Lund, March 2006
0682