Sontay RE-3P-105 Manual Download Page 4

Page: 4 / 4

Tel: +44 (0)1732 861200 - E-mail: [email protected] - Web: www.sontay.com

Page 4 of 4

RE-3P-105

3-Phase Panel Mount 105kW

Issue Number: 7.0

Date of Issue: 02/01/2018

Four Elms Road



Edenbridge

Kent



TN8 6AB



Whilst every effort has been made to ensure the accuracy of this specification, Sontay cannot accept responsibility for damage, injury, loss or

expense from errors or omissions. In the interest of technical improvement, this specification may be altered without notice.

Jumper Settings & Connections

Typical 3-Phase installation

Input configuration

Star configuration:

Delta configuration:

WARNING!
Do NOT connect the neutral to the star point of heater.

Load

Summary of Contents for RE-3P-105

Page 1: ...with an alarm output for over temperature protection and LED Indication of Output ON The RE 3P series are designed to mount on the control panel back plate Specification Input signal 0 10Vdc Input imp...

Page 2: ...ural airflow The equipment s environment and its initial ambient temperature also need to be considered as this could have an adverse effect on the overall operating conditions Fusing We recommend tha...

Page 3: ...problems Caution In normal operation the heat sink surface can exceed 90 C Dangerous voltages exist on the PCB and particular care should be taken The RE 3P 105 must be installed in accordance with t...

Page 4: ...t has been made to ensure the accuracy of this specification Sontay cannot accept responsibility for damage injury loss or expense from errors or omissions In the interest of technical improvement thi...