SonoSite Mobile Docking System M Series, User Manual, Page: 15 / 154

En
glish
De
utsch
Español
Fr
a
n
ça
is
It
a
lia
n
o
Po
rt
u
g
u
ê
s
Connecting Triple Transducer Connect 13
Connecting Triple Transducer Connect
The Triple Transducer Connect (TTC) is an optional three-transducer module for the MDSm that
allows connection of up to three transducers simultaneously while the ultrasound system is docked.
Figure 6 Connect Transducer Connector to System
Connect
transducer
connector on
TTC to system 1 Raise locking lever.
2 Pull the transducer latch up and rotate 90°.
3 Align and insert the transducer connector to the connector on the bottom of
the ultrasound system.
4 Turn the latch back 90° and press in, securing the transducer connector to the
ultrasound system.
5 Place the system into the MDSm.
Connection is made when the locking lever is pushed down.
Transducer
connector
Ultrasound
system
Transducer
select buttons
Locking lever
Connect
transducer to
TTC 1 Pull the transducer latch up and rotate 90°.
2 Align and insert the transducer connector to the connector on the bottom of
the TTC.
3 Turn the latch and press down, securing the transducer connector to the Triple
Transducer Connect.
Select
transducer Note: When you use the TTC, there may be a minor reduction of transducer
penetration.
Push the transducer select button on the TTC to select the desired transducer. See
Figure 6 on page 13.
• When selecting another transducer, the system restarts. The light on the button
flashes momentarily and then turns solid green.
• Only one transducer is accessible at a time.