SonoSite M-Turbo, Service Manual

Page: 17 / 58

Chapter 3: Troubleshooting 13
Chapter 3: Troubleshooting
This chapter contains information to help you correct problems with system operation and provides instructions
on the proper care of the system, transducer, and accessories.
Periodic Maintenance
There is no recommended periodic or preventive maintenance required for the system, transducers, or accessories.
There are no internal adjustments or alignments required. There are no functions that require periodic testing or
calibration. Performance tests are described in
Chapter 5, “Performance Testing” of this manual. Performing
maintenance activities not described in this manual may void the product warranty.
Local regulations may require electrical safety testing.
Contact SonoSite Technical Support for any maintenance questions.
System and Subsystem Diagnosis
This section covers basic diagnostic and troubleshooting procedures you may follow if the system does not
operate properly. To diagnose system failures, consult the referenced diagnostic figures that follow or SonoSite
Technical Support.
System Repair
The system is repairable through subassembly replacement or through replacement of parts as recommended by
SonoSite in
Chapter 4, “Replacement Procedures.” Component level repair of Printed Circuit Board Assemblies is
performed only at the SonoSite repair facility. Replacement of board level components by unauthorized service
facilities voids the SonoSite warranty.
Test Equipment
Test equipment is not required for this troubleshooting section. Troubleshooting test aids include an external
monitor and a spare battery.
Table 3.1: Troubleshooting Subassemblies and Diagnostic Figures
Subassemblies Diagnostic Figures or Table
DICOM Table 3.2
Dipslay TBA
Battery TBA
Control Panel TBA