Quick Reference Guide
SonoSite iViz Ultrasound System
Quick Reference Guide
SonoSite iViz Ultrasound System
Before scanning
Installing the battery
1
On the back of the system, position the battery in the battery slot so that the
beveled edge of the battery is nearest the side of the SonoSite iViz system.
2
Press the battery firmly into the back of the system until it locks in place.
Checking the battery bay charger
Connecting transducers
Insert the transducer connector into the bottom of the system, with the
transducer cable facing away from the other connectors.
Before scanning
Using gestures
Swipe
Move your finger quickly across the screen.
Drag
Move one or two fingers across the screen, usually to move an object from one
location to another.
Tap
Quickly touch the screen once.
Press and hold
Touch your finger to the screen, and hold it there for about two seconds.
Pinch or zoom
Slide two fingers together or apart on the screen.
Turning on the system
1
Check that a battery is installed.
2
Press the
Power
button, and wait several seconds for the system to power
on.
3
Swipe up on the
Lock
icon.
Choosing an exam type
1
When scanning, tap the
Exam Type
drop-down menu in the upper right of
the screen. A list of available exam types appears.
2
Tap the exam type you want to change to.
LED Behavior
Condition
Blinking green
Battery is charging.
Green
Battery is fully charged.
Amber/light red
Battery is very low.
Red
Bad battery pack; recycle the battery.
Page 3 of 10
P22705-01
Page 4 of 10
P22705-01
