SONOPLOT MICROPLOTTER Proto, Manual

Page: 37 / 67

Saving positions
It is often useful to be able to save positions that can be returned to quickly at a later time. A
window of the interface is provided to allow you to do this.
This panel presents a list of previously saved positions, their associated coordinates, and a set
of 3 buttons. These are
• +
• -
• Crosshairs
To move to a previously saved position, highlight a position by clicking on it and press
Crosshairs . This will cause the dispenser to pick up to a set height (the setting of which will
be explained in the next section), move over to the correct X, Y coordinate, and move the print
head back down to the necessary height.
To save the current position in order to return to it quickly at a later time, click on
+
. This will
insert a new position into the list for the current coordinate and give you the ability to edit its
name.
To delete a position, highlight it in the list and click on - .
33