14
COMPUTER-BASED AUDIO SET-UP
To update this version to a newer (or older) firmware version,
press the FW FILE button then locate and select the replacement
firmware file. It will have a .bin suffix. For example: Sonoma_Model_
One_V1-1-0.bin.
The correct firmware file will be shown in the dialog window.
Confirm that you have selected the correct file and press the
UPDATE DEVICE button. During the update, you will see the
progress bar advance, and messages will appear at the bottom of
the dialog window.
Do not remove the USB cable or close the application during
the update. To be safe, please make sure that your computer is
plugged into mains power. When you see the
UPDATE COMPLETE
message under the blue bar, you can close the application.
NOTE
:
You must turn off the amplifier and turn it on again to activate the
new firmware!
If you want to interrogate the unit to confirm that the new version
is installed, you can run the Sonoma M1 Updater application again.
