7
INSTALLATION
Connect the stereo analog output of a portable audio device, for example, to the 3.5 mm stereo input
jack. Simply insert the jack until it latches. To remove, carefully pull on the connector (not the cable!).
Connect the stereo (L and R) analog outputs of a disc player or the Pre-Outs of an amplifier using two
cables fitted with RCA connectors. Push the jacks until they make a firm connection. To remove, simply
pull on the connectors (not the cables!).
Connect the coaxial digital (S/PDIF) stereo output of a digital audio disc player (CD/DVD/SACD/BD) to
the coaxial S/PDIF digital input. Use a digital interlink fitted with RCA connectors. Push the jack until it
makes a firm connection. To remove, simply pull on the connector (not the cable!).
Connect a digital audio player or computer to the USB digital input using the supplied USB cable, or
any similar high-quality USB cable up to 2 meters in length. Avoid using longer USB cables or USB hubs.
NOTE:
Windows PC users please refer to the section
XMOS Driver Installation for Windows Users
before
attempting to use a PC with this product!
ASSEMBLING AND CONNECTING THE POWER SUPPLY UNIT
When all audio sources and the headphones have
been connected to the amplifier/DAC unit, it will
be time to connect the power supply unit, however,
before beginning, please ensure that the volume
control is turned to its lowest position as shown.
Firmly insert the supplied IEC mains cable into the
power supply unit.
Carefully insert the cable from the power supply
unit into the power connector on the back of the
amplifier/DAC unit. Then lock the connector in place
by turning the threaded connector clockwise. To
remove, first unscrew the connector (by turning it
counter-clockwise) and then carefully pull on it (not
the cable!).
When the power supply unit has been assembled and
connected to the amplifier/DAC, insert the mains
plug into a GROUNDED mains socket!
PLEASE NOTE:
your product has been supplied with
the correct mains cable for your geographic location,
and may differ in pin configuration from the model
illustrated!
