‘Locate the three PCO-Purifier Cores which have a
distinct honeycomb structure.
Pull the PCO- Purifier Cores towards you and discard
according to local refuse regulations.
Locate the two UV light bulbs located between the
PCO-Purifier Cores.
Push the red button located at the base of the light
bulb.
Carefully remove light bulb from the interior of the unit.
* Note that these light bulbs contain mercury, so check
with your local refuse agency and discard according
to local regulations.
Remove a new UV light bulb from packaging.
Carefully line the bulb up within the metal ring and line
up the socket with the metal pins.
Push the bulb horizontally to snap the bulb into place,
ensuring that the metal pins align with the contact
clamps in the socket.
Replacing the PCO-Purifier Cores
To simplify procedures we suggest you replace the PCO-Purifying
Cores when you replace the Germicidal UV lamps.
After replacing the UV light bulbs you are ready to
replace the PCO-Purifier Cores.
Remove the Purifier Cores from the fresh sealed bag.
Slide the new PCO-Purifier Cores into the metal guides.
Close the side-access panel and screw the door into
place.
To reset the service light, turn the fan knob to
automatic and then turn the Sonoma Breeze
®
on and
turn the fan speed knob to clockwise to low.
