5-4
6.
Work the power connector along with the
Ultra ATA66 cable into the expansion bay
(Figure 8)
.
7.
Attach the power connector and the
primary/master connector on the Ultra ATA66
cable to the hard drive
(Figure 9)
; if you are
unfamiliar with the Ultra ATA66 cable connec-
tors, see page ix, for further information.
8.
Slide the hard drive into the expansion bay
(Figure 10)
.
Close Computer
1.
Carefully position the Ultra ATA66 cable inside
the computer as to avoid crimping it by the
case cover and replace the side panel onto your
Power Macintosh
(Figure 11)
.
2.
Return the computer to your computing area
and reconnect the power and peripheral cables
to the computer.
Turn On Computer
1.
Turn on your Power Macintosh.
2.
For your computer to properly recognize a
new hard drive, you will need to initialize
and format it. Refer to Chapter 3, “Hard
Drive Initializing” for further instructions.
Figure 9
Figure 10
Figure 11
additional drive
power connector
Ultra ATA66 cable
hard drive
Figure 8
Ultra ATA66 cable
additional drive
power connector
