Sonnet Fusion R400 User Manual Download Page 12

7 – Specifications, Warnings, and Additional Information

•  If unusual smells, sounds, or smoke come from the device, or if 

liquids enter it, switch it off immediately and unplug it from the 
electrical outlet. 

•  Follow the instructions in this manual carefully; contact your 

reseller or local distributor for additional advice not covered in 
this User’s Guide. 

FCC Compliance 

Fusion R400 RAID USB 3.0 complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: This device 
may not cause harmful interference, AND this device must accept 
any interference received, including interference that may cause 
undesired operation.

Contacting Customer Service

The Sonnet Web site located at www.sonnettech.com has the 
most current support information and technical updates. Before 
you call Customer Service, please check our Web site for the latest 
updates and online support files, and check this User’s Guide for 
helpful information. 

When you call Customer Service, have the following information 
available so the customer service staff can better assist you:
• Product name 
• Product serial number 
• Date and place of purchase 
• Hard drive model(s)
• Computer model 
• Operating system 
• Software/firmware versions

USA Customers 

If further assistance is needed, please contact 

Sonnet Customer 

Service

 at:

  

Tel

: 1-949-472-2772  

(Monday–Friday, 7 a.m.–4 p.m. Pacific Time) 

E-mail

[email protected]

For Customers Outside the USA

 

For support on this product, contact your reseller or local 
distributor. 

Visit Our Web Site

For the most current product information and online support 
files, visit the Sonnet Web site at www.sonnettech.com/support/. 
Register your product online at http://registration.sonnettech.
com to be informed of future upgrades and product releases.

Specifications 

Compatibility

Compatible with Mac, 

Windows, and Linux computers 

with an eSATA interface

External Connector

One USB 3.0

Data Transfer Speed

Up to 250 MB/s, depending 

on interface used and drive 

configuration

OS Support

Platform independent

Supported Drive 

Configurations

Hardware-based RAID 0, 5, and 

10; span, and JBOD

Power Supply

Universal 220W, 100–240V AC, 

50–60Hz

Operating Temperature

32 to 104˚ F (0˚ C to +40˚ C)

Dimensions (WxDxH)

17.0 x 16.25 x 1.75 in.  

(43.2 x 41.3 x 4.4 cm)

Weight

14.85 lbs (6,74 kg)

RoHS Compliant

Yes

Package Contents

• Rackmount disk enclosure

•  Four 3.5" drive trays

• One USB 3.0 cable

• Power cord

• User's guide

• Tube of threadlocker

• Drive mounting screws

 

SAFETY PRECAUTIONS

Please read this section carefully before proceeding. These 
precautions explain the correct and safe use of this device, 
thereby helping to prevent injury to you or others, and also help 
you to minimize the risk of damaging the device.

Warnings

Always follow the basic warnings listed here to avoid the risk of 
serious injury or death from electrical shock, short-circuiting, fire, 
and other hazards. These warnings include, but are not limited to:

•  With the exception of the user-swappable parts, do not attempt 

to disassemble or modify the enclosure. If this device appears to 
be malfunctioning, contact your reseller or local distributor.

•  Do not drop the enclosure; dropping or mishandling of the 

enclosure or adapter card may result in a malfunction leaving 
the product inoperable.

•  Do not expose the device to rain, use it near water or containers 

that contain liquids which might spill into any openings, or in 
damp or wet conditions. 

©2014 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, Creativity Stored Here, and Fusion are trademarks of Sonnet Technologies, Inc. Mac, the Mac logo, and 
OS X are trademarks of Apple Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice. Printed in 
the USA. UG-FUS-R4BR5-0TB-E-A-100314

Summary of Contents for Fusion R400













Reviews: