GB
4
Safety instructions
Please read the following information about
installation and commissioning carefully
before you start using your product. This will
prevent damage to your system that could
result from improper use.
Improper use and impermissible changes
during assemblyas well as on the
construction lead to the exclusion of any
liability claims.
The rules of technology are in addition to
countryspecific regulations
Of particular note.
DIN 1988
Technical rules for drinking water
installations
DIN 4753
Water heaters and water heating systems for
drinking and industrial water; Requirements,
marking, equipment and testing
DIN 12828
Heating systems in buildings planning
of hot water heating systems
DIN 18380
Heating systems and central water heating
systems
DIN 18381
Gas, water and sewage installation systems
EN 12975 / EN 12977
Thermal solar systems
and their components
VDI 2035
Avoiding damage in
Hot water heating systems
All images are symbolic. Subject to
typesetting and printing errors. Technical
changes may be made without prior notice.
© 092 Reference is made to the validity
of the General Terms and Conditions in the
currently valid version.
Mounting
The mounting and installation must be carried out by an approved specialist
company! It is recommended to dismantle the preassembled fleece insulation
to reduce the installation dimension. The installation must take place in a frost
proof room with short cable routes.
Note: Make sure that the expansion vessel in the heating circuit is adequate. The
buffer volume and the occuring temperature differences in solar systems have
to included in the calculation!
Scope of delivery
System tank with isolation
2 pcs adhesive rosette
130/80
3 pcs adhesive rosette
110/60
2 pcs adhesive rosette
80/40
3 pcs adhesive rosette
80/00
14 pcs.EPP caps
Version: 2021-09-15
POSSIBLE COMBINATIONS SONNENTANK SYSTEM TANK
+ WATER
+ WATER
+ ELECTRICITY
+ WATER
+ HEATING
+ WATER
+ HEATING
+ ELECTRICITY
