4 How to handle the water tank
Place the fan on a firm surface and pour water into the water tank. Comply with the 6 steps below.
Note:
Disconnect the power plug from the mains socket before removing the water tank. Do not fill the
water tank with hot water (40°C and more).
Open the water tank cover
Lift the water tank up..
Remove the water tank completely
Turn the underside of the water
Unscrew and remove water tank lid.
Screw the water tank lid firmly, place
Upwards.
and fill with water.
tank in fan and close cover.
Note:
Do not fill with dirty water or include any additives (such as perfume, essential oils, insect repellents
etc.). Only use clean drinking water or filtered water to ensure the long life of the air humidifier.
5 How to operate the fan
1. Plug the plug into the mains socket and ensure that the indicator lamp lights up as shown below.
2. Press the "ON/SPEED“ button to adjust the blower speed (low, medium, high). The lamps in the control
panel light up accordingly.
3. Press the "WIND“ (FAN) button to select the fan mode. The appropriate lamp lights up.
"Normal": Fan speed is based on low/medium/high speed.
"Natural“: Imitates natural wind based on a high or low fan speed.
"Sleeping“ (sleep mode): For the first half hour, a strong and low natural fan speed, then a medium natural
fan speed. In the second half hour until the end of the preset time, change to a lower natural fan speed.
