Sonnen sonnenBatterie eco 9.43, Installation Instructions Manual, Page: 20 / 60

5 | Mounting
20 / 60 Installation instructions sonnenBatterie eco 9.43
• Material: metal or plastic with a flammability class of V-1 in accordance with
UL94
• Fine thread: M32x1,5
• External diameter: 35 mm
• Temperature range: -60 °C to +200 °C
5.4.1 Requirements for mounting material
„
Use only screws with the following properties:
8 mm max. 15 mm
max. 6 mm
Illustration 7: Parameters of the screw used
• Screw head diameter: max. 15 mm
• Screw diameter: 8 mm
• Hight of screw head: max. 6 mm
• The screw lengths and the wall plugs used must be suitable for the nature of
the wall.
5.4.2 Placing the levelling mat or the pedestal
The levelling mat (1) is part of the scope of delivery for storage systems with ex-
tension cabinet. It is used to compensate uneven floors.
Alternatively the extension cabinet can be placed on an optional pedestal (3) in-
stead of the levelling mat. This is helpful if the extension cabinet doesn’t meet
flush with the wall (e.g. because a skirting board (2) is mounted).
1 3 2
Illustration 8: Levelling mat or pedestal
„
Place the levelling mat (1) or the ped-
estal (3) at the preferred installation
location.
5.4.3 Drilling the holes
Holes must be drilled into the wall to mount the storage system. The arrangement
of the holes depends on whether the big or the small extension cabinet is used.
A drilling template is part of the packaging of the main cabinet. Therewith it
is easier to mark the position of the holes on the wall. Please note that the
drilling template does not consider the levelling mat or the optional pedes-
tal!
Without extension cabinet
If the storage system is used without extension cabinet it is a good idea to ob-
serve the dimensions provided in one of the two figures above. That way no new
holes need to be drilled if the storage system is extended at a later time.