4 | Mounting
16 / 40
Installation instructions sonnenBackup-Box
1
6
1
0
1
5
3
2
8
3
8
,5
524
2
2
6
33
6
2
6
5
2
6
Illustration 5: Drill template for Backup-Box
(Figure not to scale - all specifications in milli-
metres)
Drill the holes shown in red in the illustration on
the left.
4.4.3 Fastening the Backup-Box
1. Apply the screws
There are keyhole attachments on the rear of the Backup-Box. The Backup-Box is mounted
using these attachments.
2 mm
Illustration 6: Distance between screw head
and wall
Apply suitable screws and anchors (see Re-
quirements for mounting material [P. 15]) to the
previously drilled holes.
The screw should not be completely screwed in. The screw head should protrude from the
wall by approx. 2 mm.
2. Attach the Backup-Box
Illustration 7: Hanging up the Backup-Box
Attach the Backup-Box to the previously moun-
ted screws.
3. Tighten the screws
Illustration 8: Tightening the screws
Tighten all visible screws.
