41
Hardcoded Shortcuts
Hardcoded Shortcuts
The following is the list of hardcoded shortcuts.
Long press center button - Silences the incoming call
ringtone.
Long press 3 or the right arrow key - Switches the
speaker mode during a GSM call.
Press the green dial button From idle screen - Get the
outgoing call list.
Enter 0 followed by SEND - Releases all held calls or
sets User Determined User Busy (UDUB) for a waiting
call.
Enter 1 followed by SEND - Releases all active calls (if
any exist) and accepts the other (held or waiting) call.
Enter 1X followed by SEND - Releases a specific active
call X.
Enter 2 followed by SEND - Places all active calls (if
any exists) on hold and accepts the other (held or
waiting) call.
Enter 2X followed by SEND - Places all active calls on
hold except call X with which communication shall be
supported.
Enter 3 followed by SEND - Adds a held call to the con-
versation.
Enter 4 followed by SEND - Connects two calls and dis-
connects the subscriber from both calls (ECT).
Enter 4 * "Directory Number" followed by SEND - Redi-
rects an incoming or a waiting call to the specified
directory number.
Enter 5 followed by SEND - Activates the completion of
calls to busy subscriber request.
Enter "Directory Number" followed by SEND - Places all
active calls (if any exists) on hold and sets up a new
call to the specified directory number.
Enter END - Releases the subscriber from all calls
(except a possible waiting call).
Press LEFT and RIGHT key in Outgoing/Answered/
Missed calls list - Allows to scroll between these 3
screens.
"X" is the numbering (starting with 1) of the call
given by the sequence of setting up or receiving
the calls (active, held or waiting) as seen by the
served subscriber. Calls hold their number until
they are released. New calls take the lowest
available number.
Where both a held and a waiting call exist, the
above procedures shall apply to the waiting call
(i.e. not to the held call) in conflicting situation.
Summary of Contents for XP1
Page 1: ......
