12
Getting started
The device with a fully-charged battery can remain in the
standby mode for a duration of 200 hours.
Operations in standby mode
The following can be accessed from the home screen when
the phone is in standby mode or when the phone is not in
use.
Basic settings
When you have switched on your phone the name of the
service provider is displayed.
Security settings
1.
To prevent unauthorised use of your phone, you can
set a PIN code. In order to change the PIN , the
default PIN 0000 should be activated first .Once this
PIN is activated , then only the PIN can be changed to
the user’s chosen PIN.
2.
Select
Menu
>
Settings
>
Security
settings
>
PIN
code
>
On
>
OK.
After this is set, every time you
power on the phone, you will be requested to enter
the PIN. If the PIN code is wrong you cannot access
the phone.
Press
To access
Up arrow
Call list
Down arrow
Phone book list
Right arrow
Write Message
Left arrow
WAP options
1.GPRS connectivity
2.Signal strength indica-
tor
3.Display icons
4.Battery charge indica-
tor
5.Service provider
6.Local time
7.RSK command
8.LSK command
Standby screen
Menu key
Main menu
Left Selection key
Main menu
Right Selection key
Phone book
Call accept/Send key
Outgoing calls list
The four functions that are performed using
the arrow keys are set as factory defaults,
however they can be changed. You can also
configure new shortcuts. For more informa-
tion on shortcuts refer page 21.
Press
To access
Summary of Contents for XP1
Page 1: ......