18
5 Webpage Interface
5. Webpage Interface
The Pro Audio Streamers have a built in webpage to configure them. The
following section will guide you through the process of accessing the
webpage. Please read all the steps before starting the process.
1. Power the unit and connect the ethernet cable to the PC or laptop that
you’ll use to access the webpage.
2. The unit will be assigned an IP address and this is spoken as audio
through the headphone socket after power up. Connect a pair of
headphones, listen to the IP address and write it down. An example
of an IP Address is ‘192.168.0.100’ (with decimal point described as a
‘dot’).
3. Open an internet browser and type ‘http://’ followed by your IP
address, so using the example above, http://192.168.0.100
4. The ‘basic settings’ page should now open. Please note that for this
to work, you may need to alter the IP address of your laptop so that it
has the same subnet as the Pro Audio Streamer. In the above example,
your laptop/PC should have an IP address of 192.168.0.xxx (where xxx
is between 0 & 255) in order for it to connect correctly.
Fig 5-1: The PS-SEND Webpage
