background image

i

Warranty

Product Warranty - 2 Year Extended

As standard, Sonifex products are supplied with a 1 year back to base 
warranty. In order to register the date of purchase and so that we can keep 
you informed of any product design improvements or modifications, it is 
important to complete the warranty registration online. Additionally, if you 
register the product on the Sonifex website, you can increase your product 
warranty to 2 years. Go to the Sonifex website at: http://www.sonifex.
co.uk/technical/register/index.asp to apply for your 2 year warranty.

Note:

 For your own records the product serial number is recorded on the 

CE certification page of this handbook.

Sonifex Warranty & Liability Terms & Conditions

1. Definitions

‘the Company’ means Sonifex Ltd and where relevant includes companies 
within the same group of companies as Sonifex Limited.

‘the Goods’ means the goods or any part thereof supplied by the Company 
and where relevant includes: work carried out by the Company on items 
supplied by the Purchaser; services supplied by the Company; and software 
supplied by the Company.

‘the Purchaser’ means the person or organisation who buys or has agreed 
to buy the Goods.

‘the Price’ means the Price of the Goods and any other charges incurred by 
the Company in the supply of the Goods.

‘the Warranty Term’ is the length of the product warranty which is usually 
12 months from the date of despatch; except when the product has been 
registered at the Sonifex website when the Warranty Term is 24 months 
from the date of despatch.

‘the Contract’ means the quotation, these Conditions of Sale and any 
other document incorporated in a contract between the Company and the 
Purchaser.

This is the entire Contract between the parties relating to the subject 
matter hereof and may not be changed or terminated except in writing in 
accordance with the provisions of this Contract. A reference to the consent, 
acknowledgement, authority or agreement of the Company means in 
writing and only by a director of the Company.

2. Warranty

a. 

The Company agrees to repair or (at its discretion) replace Goods 
which are found to be defective (fair wear and tear excepted) and 
which are returned to the Company within the Warranty Term 
provided that each of the following are satisfied:

i. 

notification of any defect is given to the Company immediately 
upon its becoming apparent to the Purchaser;

ii. 

the Goods have only been operated under normal operating 
conditions and have only been subject to normal use (and 
in particular the Goods must have been correctly connected 
and must not have been subject to high voltage or to ionising 
radiation and must not have been used contrary to the 
Company’s technical recommendations);

iii.  the Goods are returned to the Company’s premises at the 

Purchaser’s expense;

iv. 

any Goods or parts of Goods replaced shall become the 
property of the Company;

v. 

no work whatsoever (other than normal and proper 
maintenance) has been carried out to the Goods or any part of 
the Goods without the Company’s prior written consent;

Summary of Contents for CM-CU1













































Reviews: