23
CM-CU21 Configuration Options 2
CM-CU21 Configuration Options
The Commentator Unit has several user configurable options that can
be changed to suit specific operational or personal requirements. These
options can only be changed by entering a setup mode, which is accessible
when the unit is powered-up.
Entering Setup Mode
Apply power to the unit whilst keeping the Commentator 1 and
Commentator 2 On Air buttons pressed for 5 seconds. The power indicator
LED will flash red and amber to indicate setup mode has been entered. The
Commentator 1 and Commentator 2 On Air buttons can now be released.
The configuration options are arranged in 7 Pages, with up to 7 options
in each Page. The current Page number is indicated on the PPM display
by a single illuminated segment. Please note, when Page 6 is selected, all
the segments in the PPM display are enabled to indicate the current PPM
illumination level setting. Each option within the selected page is associated
with one of the 7 main control buttons on the top panel of the unit. Each
button flashes in a recurring sequence to indicate the current mode setting
of the associated option. One flash equals mode 1, two flashes equals mode
2 etc. Buttons that do not have an associated option in the current page do
not flash.
Please Note:
when Page 6 is selected, all the segments in the PPM display
are enabled to indicate the current PPM illumination level setting.
Changing The Current Page
Press and hold the Commentator 3 On Air button for at least 1 second. The
PPM display will change to indicate the new page.
Changing The Option Mode Setting
Press the appropriate button once. The number of flashes will increase to
indicate the new mode setting. Once the maximum option mode setting
has been reached, the value will wrap around to mode 1.
The configuration option settings for each page are listed below. The factory
default settings for each option are shown in brackets:
Config Page 1 - ON AIR Button Enable/Disable & TALKBACK
Button Latching Modes
Commentator 1 ON AIR button:
Mode 1 Commentator 1 ON AIR is permanently disabled and cannot be
selected.
Mode 2 Commentator 1 ON AIR can be selected as normal (default).
Mode 3 Commentator 1 ON AIR is permanently selected and cannot be
disabled.
Commentator 1 TALKBACK A button:
Mode 1 Commentator 1 TALKBACK A button momentary mode enabled
(default).
Mode 2 Commentator 1 TALKBACK A button latching mode enabled.
Mode 3 Commentator 1 TALKBACK A button momentary and latching
modes enabled.
Commentator 1 TALKBACK B button:
Mode 1 Commentator 1 TALKBACK B button momentary mode enabled
(default).
Mode 2 Commentator 1 TALKBACK B button latching mode enabled.
Mode 3 Commentator 1 TALKBACK B button momentary and latching
modes enabled.
Commentator 2 ON AIR button:
Mode 1 Commentator 2 ON AIR is permanently disabled and cannot be
selected.
Mode 2 Commentator 2 ON AIR can be selected as normal (default).
Mode 3 Commentator 2 ON AIR is permanently selected and cannot be
disabled.
