46
13
Embedded Web Server
Audio - Advanced Settings Web Page
The Advanced Se�ngs page is located under the Audio sub tab and it shows
the current opera�ng mode of the unit.
Fig 13-20: Audio - Advanced Se�ngs Web Page
Intercom Mode
– For connected calls in normal mode, the remote devices
hear the local microphone audio, and the audio received from the remote
devices is mixed and routed to the headphone and loudspeaker. In 4W
bridge mode, remote devices hear the audio presented at the selected local
audio input. The audio received from the remote devices is mixed and
routed to the selected local audio output.
4W Bridge Input
– This op�on selects the local audio input that is the
source for calls to remote units.
4W Bridge Output
– This op�on selects the local audio output where call
audio from remote units is routed.
Audio - Advanced Se�ngs Defaults
Intercom Mode:
Normal
4W Bridge Input:
Input 3
4W Bridge Output:
Output 3
Page Settings Web Page
The Page Se�ngs page shows the current list of target intercoms for the
page func�on. The page priority se�ng is also set here.
Fig 13-21: Page Se�ngs Web Page
Page Priority
– This op�on selects whether received page calls have priority
over current intercom calls. If this op�on is enabled, all current intercom
calls will be suspended during a received page call. These calls will then
resume once the page call has ended. If a page request is received and this
op�on is disabled, the page will be ignored.
