SonicWall Switch Getting Started Guide
Configuring from the Firewall
46
6 Connect the SonicWave access point to port 15 on the Switch.
7 Go to the Switch Port Settings for port 15 (as in step 5) and set the Portshield Interface to X4.
You may instead set the port to any VLAN in the X4 interface which is in the WLAN zone, see
8 After connecting and Port-Shielding the interface where SonicWave connected to firewall interface,
verify that the Sonicwave gets an IP address from the configured network.
To do this, in the firewall GUI, go to
Access Points > Base Settings
and select
SonicWave Object.
For details on configuring the SonicWave object, see
Configuring the SonicWave Settings:
9 Connect a WiFi client and check that it gets an IP address from in the X4 Portshield leasehold.
Configure the network interface to the Switch supporting the access point to support to WLAN.
1 Login to the firewall as an adminstrator and go to
MANAGE | Network > Interfaces
page and click on the
configure icon for the inteface the Switch is supported on.
2 Select
WLAN
for the
Zone
type.
3 Select the
Static IP Mode
for the
Mode/IP Assignment
.
