SonicWall Switch Getting Started Guide
Configuring from the Firewall
30
Enabling the Switch
If the firewall to Switch link is down, navigate to
Switch Controller > Overview
and click on 3 dot menu of the
Switch which is off-line and then click on
Edit Switch
to bring up the Switch configuration dialog box. Check if
the Switch configuration details are correct including: IP address, serial number, and Switch Management
interface. This can also be done by going to
Switch Controller
>
Switches
and clicking on
Configure
. See
Changing the Switch Configuration
.
Shutting Down the Switch
To remove a Switch from a firewall, navigate to
Switch Controller > Overview > Physical View
and click on the
Delete Switch
. This can also be done by going to
Switch Controller
>
Switches
and clicking on
Configure
. See
Changing the Switch Configuration
.
