SonicWALL SSL-VPN 4000 Getting Started Guide Page 37
Create access to the LAN for NetExtender:
1. In the
Firewall > Access Rules
page, click
.
2. In the
Welcome to the SonicWALL Network Access Rules
page, click
Next
.
3. In the
Step 1: Access Rule Type
page, select
General Rule
. Click
Next
.
4. In the
Step 2: Access Rule Service
page, select
Any
. Click
Next
.
5. In the
Step 3: Access Rule Action
page, configure:
Click
Next
.
6. In the
Step 4: Access Rule Source Interface and Address
page, perform the
following selections and click
Next
:
Click
Next
.
7. In the
Step 5: Access Rule Destination Interface and Address
page, perform the
following selections and click
Next
:
8. In the
Step 6: Access Rule Time
page, leave
Time Active
set to
Always Active
unless you want to limit when you want SSL-VPN clients to have access to the LAN.
9. In the
Congratulations
page, click
Apply
to create the access rule.
Select Action for this
Rule
Allow
TCP Connection
Inactivity Timeout
30
minutes
Interface
DMZ
IP Address Begin
The beginning of the NetExtender range within your DMZ
range, for example,
10.1.1.220
IP Address End
The end of the NetExtender range within your DMZ range, for
example,
10.1.1.250
Interface
LAN
IP Address Begin
*
IP Address End
Leave blank
7
