Evo 4 Loopback Kit Installation
Evo 4 Hardware Installation
Overview
The Evo 4 Loopback Kit includes the parts needed for recording Windows communication software, such
as a Zoom online conference IP telephone “softphone”. Included in the kit are:
-
Audient Evo 4 USB audio interface mixer (2 channels)
-
Samson C02 microphone and desk stand
-
Computer audio output cable
-
Monitoring headphone with ¼” adapter
-
Mono monitoring headphone
USB Interface
The Audient Evo 4 interface requires a USB 2.0 or USB 3.0 connection. The Evo 4 should be connected
directly to a port on the computer or a manufacturer supplied docking station. Connecting it to a USB hub
may result in unreliable operation.
Power Connection
The Evo 4 is powered from the USB Port and does not require the use of a power adapter.
Audio Connections
The included microphone is connected to the Evo 4 microphone input #1 using the included standard
XLR microphone cable. This microphone is used to record the local participant in SoniClear and can also
be configured as the microphone for the communications software.
The speaker or headphone output of the computer is connected to the Evo 4 microphone input #2 using
the ¼” to 3.5 mm audio cable included in the kit. Note that this cable is plugged into the ¼” part of the
“combo” input connector on the back of the Evo 4.
The supplied monitoring headphone is plugged into the front of the Evo 4 adapter using the supplied ¼”
adapter. Any standard headphone can be used for monitoring, as well.
