SONICCOUTURE ELECTRO ACOUSTIC, User Manual

Page: 12 / 24

ELECTRO-ACOUSTIC
THE PARAMETER PANEL
These controls shape the sampled signals on the channel knobs. The
pitch, envelope, and velocity response of a drum can be controlled
here using the various knobs.
A second set of controls featuring high and low pass filters can be
accessed by clicking the white squares in the bottom right corner, as
shown in the pic sure to the left. The filters can be bypassed using
the white squares, this will save CPU. RES applies to LPF only.
CURVE: This changes the ATTACK curve from concave (far left) to
Convex (far right)
IMPORTANT: EDIT MODE!!
ALL: If ‘ALL’ is displayed then the parameter knobs will affect all that drum’s channels at
once (1073, AMP, VALVE, etc)
ONE: If ‘ALL’ is clicked and ‘ONE’ is displayed ( see pic above), then only the channel
selected will be edited by the parameter knobs. Channels are selected by clicking on the
knob.
In the above example, the VALVE channel is selected for editing, as indicated by the
white highlight. This means that if you change the envelope, or the pitch, or the velocity
or the filters, then
ONLY THE HI-HAT VALVE CHANNEL WILL BE AFFECTED . This can be
confusing until you get used to it, but it’s a very very powerful feature which enables
complex and fun sound design.
! 12