18
P.I.R Motion Detector
The PIR Motion Detector is designed to detect the movement of object in rooms or hallway. The
effective range of the motion sensor is 30 feet long, and with an 84 degree horizontal angle.
Before using the sensor, the sensor needed to be learned into main console. If main console is armed
in HOME mode. Even if PIR Triggered, the main console will neglect the PIR signal.
Main Features :
1. LED :
When PIR has detected any moving of human. The red LED will blink for one
sec. It means to transmit out a signal to Main Console. When the battery power
is down to low level, It will send out a low voltage signal.
The red LED will blink for one sec. If Main Console receives the signal, will leave
some message on the display.
2. C/OFF/W SWITCH :
l
When the switch is set on “C – Continue” position, the PIR continually detects at
interval every 3 to 5 seconds after detecting the movement of human (dog ,cat).It is
an idea for checking
l
When the switch is set on “ OFF” position, It will turn off the power, the PIR does
not detect at all.
l
When the switch is set on “W- Wait” position, the PIR detects at every 2 minutes to
3 minutes after detecting the movement of human ( dog, cat). “ W ” position set
mode will save the power.
3. DETECTING SENSITIVITY
:
(1 , 2 , 4) select the sensor to high , medium or low
sensitivity.
4. BATTERY
:
Remove the Battery cover and insert one 9V alkaline battery.
5. ARM & HOLDER
:
For mounting on the wall.
6. BATTERY COVER
