USER MANUAL
27
Lens
– lens selection (only when the camera is calibrated to work with more than one
lens);
Laser
– Enabling/Disabling the possibility of using laser pointer;
FlashLight
– Enabling/Disabling the possibility of using LED flashlight;
AutoPowerOff
– disable or enable to power off after 10, 30 or 60 minuts of no activity;
PowerAlarm
– disable or enable audible alarm when battery level is critically low (10
times every minute).
8.5. Restoring to default settings.
After selecting main Menu, go to section 2 and select (with touch pen or Joystick) „De-
fault” tab:
And then confirm the action in the window below:
Default settings:
laser pointer, LED flashlight, Auto Power Off, Power alarm and tem-
perature alarm
– disabled;
Frame Aver
= 1 (disabled frames averaging).
8.6. Touch Pen calibration
After selecting main Menu, go to section 2 and select (with touch pen or Joystick) „Touch-
Pen” tab:
After selecting this option, four markers (points) will start appearing in the corners of the
screen ,one by one starting from the top left corner, proceeding in the clockwise direction.
Fift one will appear in the center of the screen. User should always be pressing the center
of each marker with touch pen:
Summary of Contents for KT-640
Page 14: ...SONEL KT 640 THERMAL IMAGER 14 Available colour palettes 1 2 3 4 5 6 7 8...
Page 49: ...USER MANUAL 49 3 in the next window select General and then Restart now 4 go to Troubleshoot...
Page 50: ...SONEL KT 640 THERMAL IMAGER 50 5 go to advanced options 6 select Startup settings...
Page 54: ...SONEL KT 640 THERMAL IMAGER 54 And select an option as below...
