SAFETY INSTRUCTIONS
- Before installing the Allegro 576 regulator, ensure
that the environmental conditions (operating
temperature, humidity, pollution and gas emissions)
are suitable, as any of these factors can cause the
unit to malfunction.
- When handling the Allegro 576 regulator, whether
for installation or repairs, disconnect it from the
electricity mains.
- The Allegro 576 is an independent control device for
surface assembly with wiring through tubes for
correct installation.
- Electrical connections other than those indicated in
this manual and on the connection label on the side
of the device are not permitted. The connections
referred to in this manual are those of the regulator;
to connect the rest of the components, please
consult the corresponding instructions for each unit
(collectors, tanks, valves, etc.). For correct
operation of the installation, check that the technical
needs of the elements are compatible.
- This regulator is not a security device nor can it be
used as one; it is the responsibility of the installer to
provide the protection most suited to each type of
installation (
officially authorised
).
- The assembly, electrical connection, commissioning
and maintenance procedures must be carried out by
qualified personnel.
- Should you encounter any defects that could cause
damage or malfunctions, do not connect the device.
- Should you have any doubts regarding the operation
or correct installation of the device, do not connect it
to the electricity mains and consult a professional
technician.
- Sonder Regulación S.A. reserves the right to modify
the product, technical data and assembly and use
instructions without prior notification.
WARRANTY CONDITIONS
This device has Three-year warranty. The warranty
is limited to the replacement of faulty parts, which will
be restored to the same condition in which they were
received. No packaging, batteries, instructions or any
other accessories included with the product will be
replaced.
We cannot accept any responsibility for devices
damaged as a result of poor handling, omission of the
warnings provided in this manual or technical
ignorance with regard to the requirements of the
installation.
For repairs during the warranty period, customers
are required to provide proof of purchase and an
accurate description detailing the defect or the
anomalous behaviour of the product according to the
user.
In the event of repairs outside the warranty, the user
will be informed of their viability and cost.
Assessments carried out by our technical department
may incur an additional cost for the user.
The following cases are excluded from the warranty:
Devices whose serial number has been worn away,
erased or modified.
Devices which were not connected or used in
accordance with the instructions enclosed with the
device.
Devices that have been modified without prior
agreement with the manufacturer.
Devices damaged due to knocks, spills or gas
emissions.
Devices with normal wear and tear or which are
damaged from inappropriate use.
Shipment and reception costs.
Requests for compensation for loss of earnings,
usage compensation and indirect damage, unless the
company is deemed legally responsible.
4
WARNINGS
Moderato-SR
33
Probes
- Radiation
- Temperature
New product
Versions to order
with probe
PTC2000
Remote adjustment probe
with range from 6 to 30 ºC
Summary of Contents for Allegro 576 BOX
Page 2: ...5815VØ MAY 09 2 35 NOTES ...
