5
Install drivers before plugging in the device
Installing the Batteries
Optical Mouse
• Remove the battery cover from the top of the mouse by using
release mechanism on the underside of the mouse.
• Insert the supplied batteries, making sure that the positive (+) and negative (-)
ends of each battery match the polarity indicators inside the battery housing.
• Slide the battery cover back into position until it “clicks” firmly into place.
• Turn on the mouse by sliding the on/off switch on the bottom of the mouse
to the “on” position.
• The optical sensor, located on the bottom of the mouse will glow red.
SETUP
PR10670_KeyPad_Mouse_en.indd 5
15/8/05 3:14:09 pm
