7
Setting the Identification Code
After your computer detects the USB receiver and the driver software is installed,
you must set the ID code between the receiver and the mouse as well as between
the receiver and the keypad BEFORE you can use them. To do this, do the following:
NOTE: Make sure that your computer is turned on and has detected the USB receiver
before you set the ID code.
Optical Mouse
• Press and release the setup key on the receiver. The Lock LED light turns on.
• Press the setup key on the bottom of the mouse.
• When the LED on the receiver goes out, the mouse is set up with
an ID and the receiver is locked.
• You are now ready to use the mouse.
Wireless Keypad
• Press and release the setup key on the receiver again.
• Press the setup key on the keypad.
• When the LED on the receiver goes out, the keypad
is set up with an ID and the receiver is locked.
• You are now ready to use the keypad.
Both the optical mouse and the wireless keypad/calculator are now ready to use
and you should be able to work with them simultaneously via the receiver.
Button Function Setup
• Start the setup from the Control Panel or directly click on the icon
at the bottom right corner of the screen.
• You can apply different functions to your buttons by selecting
your preferences from those displayed.
• After the function is set up, press “Yes” to store the new setup.
IDENTIFICATION CODE
PR10670_KeyPad_Mouse_en.indd 7
15/8/05 3:14:12 pm
