6
Wireless Keypad
• Remove the battery cover located on the bottom of the keypad.
• Insert the supplied batteries, making sure that the positive (+) and negative (-)
ends of each battery match the polarity indicators inside the battery housing.
• Turn on the keypad by sliding the Power switch on the underside of the keypad
to the “on” position.
WARNINGS: When replacing the batteries, you may use alkaline or other heavy-duty NiMH
batteries. Never combine an alkaline with a NiMH battery in a device. Avoid mixing
new and used batteries in a device.
Connecting the Receiver
To connect the receiver:
• Plug the USB receiver into an available USB port on your computer.
• Follow any on-screen instructions to complete the default driver installation.
• The “Lock LED” light turns on.
• You are now ready to set the identification code to establish a communication
link with the receiver.
SETUP
PR10670_KeyPad_Mouse_en.indd 6
15/8/05 3:14:11 pm
