User Manual for the Type 8370
WSM 6+ Transponder
UM-8370
Issue A Rev 1
22
Section 7 – Functional Testing
7.1 Introduction
To ensure the WSM 6+ functions correctly, the following functional tests can be carried out:
•
Transponder test
•
Responder test
•
Sensor test
•
Release test
•
Battery test
7.2 Test Equipment
Testing of the WSM 6+ can be performed using either 6G Terminal Lite software or an iWand hand
held test unit (where specified).
7.2.1 6G Terminal Lite
6G Terminal Lite software is supplied on the 6G Utilities CD. Refer to
UM-8300-099-User Manual for
6G Terminal Lite
(referred to as
6G Terminal Lite
in this manual).
7.2.2 iWAND Hand Held Test Unit
Type 8315 iWAND hand held test unit. Refer to
UM-8315 User Manual for the Type 8315 iWAND
.
7.3 Connecting the WSM 6+ to a PC
Note
Refer to
Cautions
in
Section 2 – Safety
“Equipment Damage”
.
Connect the WSM 6+ to a PC via the Type 8370-011-01/02 charger/comms.
Figure 7-1 WSM 6+ to PC Connection Configuration
PC
WSM 6+ Charger/Comms Interface
PC Comm port
WSM 6+
