STEP 7
OPERATING THE EQUIPMENT
9
If a successful connection is made the iWAND 6G Configurator homepage will now
appear. A green indicator, at the bottom of the screen will show, the Bluetooth is
connected and all data stored in the iWAND will be displayed.
Connecting the iWAND using USB
1
To connect the iWAND using a USB port, make sure the iWAND is connected to the
PC using the supplied USB cable.
2
To connect to the iWAND 6G Configurator software follow the same procedure as
connecting using Bluetooth, but select the correct Coms port the USB is connected to.
The ‘Type’ field on the select active port window will show USB. Refer to the iWAND
manual UM-8315 for instructions on installing the USB drivers.
6
In the
Select Active Port
window, the software will seek a Bluetooth connection.
7
When the iWAND Bluetooth has been detected it will appear at the top of the list.
8
Confirm the UID of the iWAND listed is correct. Click
OK
to connect to the iWAND.
Connecting the iWAND using Bluetooth
