WSM6 Manual
Document Ref: UM-8270-000
Issue: A Rev 0
Section 7
80
7.9.2.4
Running the test
1.
When Channel(s)-to-test have been selected, press
OK
then
Start
on the
Channel Range
Testing
window.
2.
The ANT will be initialised and configured with the first Channel(s)-to-test, before actual
interrogations begin.
3.
For each interrogation, the Transponder will either reply with a Turn-Around-Time, or indicate
an invalid reply.
4. Press
Previous Channel
or
Next Channel
to respectively select lower and higher ones in
the list (assuming more than one), or temporarily stop testing by checking
Show Channels to
test
and display the current list of channels.
5. Press
Stop
to stop testing, and
Back
to return to the Main window.
Figure 7-40 – Channel Testing Range
October 2011