Sonance Navigator K2, Manual, Page: 45 / 106

Chapter 5 • Navigator K2 Manager Advanced Features
37
Button Pause – The Button Pause step causes the macro to
stop executing until the button it is attached to is released. This essentially executes
a command(s) when the button is pressed and another command(s) when the button
is released.
In the example above, if you press and hold the button that the macro is attached to,
the macro will execute the first command and wait until the button is released, then
execute the rest of the commands in the macro. This works well for commands like
Scan on some VCR’s and DVD players, which you need to send the Play command
to stop the Scan function.
Page Link – The Page Link step causes the macro to
change the currently displayed page to the page (and frame) you have selected from
the drop-down list. If you have put a Page Link directly on a button as well as in a
macro on the same button, the Page Link that is directly on the button will be the
last visible change (after the macro is done running).
Shown in the example above is one way you could make one button go to two
different pages using the Page Link step with the Button Test step in a macro.
The Page Link step also allows you to select a specific frame within a page. This is
useful if you want to display a very specific group of buttons or if you want to
create an animation by jumping through many frames that contain graphics.