Setting local time:
From „Setting” menu, select the „Date Time” option, then press „OK” button.
1. Date Time mode: In case of selecting Auto setting option, the device displays the
date and time specified by your service provider.
2. In case of Manual setting option, you can manually set the date and time.
3. The Time Zone menu is active only when selecting the Auto setting option. If you
have set time zone manually, the Day Light.
Saving menu becomes active, can be switched on/off.
Ethernet settings:
In case of HD T2 devices, this option is not available.
Factory reset:
To activate the factory reset menu, you need to enter the security code (default code:
0000). After entering the security code, the device will be reset and the Init Install menu
activates. The machine will lose its previous settings.
Firmware update of the device from USP data storage:
Allows the user to upgrade the software version via USB.
1. Enter the „Setting” menu and select the „Update” menu, then press the „OK” button
2. Enter the „USB Upgrade” menu and select the program you want to install from the
background storage
Device version information:
The „Version” menu provides information on the hardware, software, firmware, date of
manufacture and MAC address. Press EXIT to exit the menu.
Automatic switch off:
In the „Auto Standby” menu, you can schedule the device to switch off when it is
inactive. If no activity is performed before the set time expires, the remote control will
switch off in standby mode. You can set 1-2-3 hours or disable this position.
Setting audio and video features
1. Use the „RIGHT” / „LEFT” buttons to select the „AV setting” option
2. Use the „UP”/ „DOWN” buttons to select the desired element, then press „OK”
button
3. Press the „EXIT” button to exit.
Setting digital audio output:
Selectable options in „SPDIF” menu for setting the coaxial audio output:
- Mute: There is no signal at the audio output
- PCM: two-channel stereo signal at the output
- Bitstream: All audio channels on the output, typically Dolby Digital or DTS
Setting aspect ratio:
Selectable options in „Aspect Ratio” menu for setting the screen display:
- 16:9
- Full screen
- 4:3 LB (Letter Box)
- 4:3 PS (Pan Scan)
Setting video output:
Selectable options in „Video Output” menu for setting the digital video output:
- CVBS: turn on composite video signal
- RGB:
Video Resolution setting:
- Auto Detect, 480p_60, 480i_30, 576p_50, 576i_25, 720p_60, 720p_50, 1080i_30,
1080i_25, 1080p_60, 1080p_50
HDMI audio output options:
Selectable options in „HDMI Audio” menu to set the HDMI audio output:
- Mute: There is no signal at the audio output
- HDMI PCM: two-channel stereo signal at the output
- HDMI RAW: All audio channels on the output, typically Dolby Digital or DTS
Playing media content (image, film, music) from storage, time shift recording
1. Use the „RIGHT” / „LEFT” buttons to select „Media Center” option from the bottom
row pictograms
2. Use the „UP” / „DOWN” buttons to select the item you want, then press the OK
button.
3. Press the “EXIT” button to exit.
Playing multimedia contents:
If you select „Multimedia” menu, the contents of the device can be played on the
USB storage. In „Video” menu, you can play the files on the storage. You can select
directories and files on your device with the navigational and „OK” buttons. You
can play, pause and stop playback with PLAY/PAUSE/SOP buttons. Supported file
formats: MPG, VOB, DAT, ASF, MKV, RM, WMV, TS, QT
- In the „Music” menu, you can play audio files from the storage. You can select
directories and files on your device using the navigation and “OK” buttons. You can
play, pause and stop the playback of the contents, using the PLAY/PAUSE/SOP
buttons. Recommended file systems: WMA, WAV, MP3
- In the „Photo” menu, you can play image files on the storage. You can select
directories and files on your device using the navigations buttons and press the “OK”
button to display the desired image file. Double-pressing the „MENU” button the data
of the displayed picture can be displayed.
- In the “Record Manager” menu, you can play video files recorded on the digital
receiver to the storage. You can select directories and files on your device using
the navigation and “OK” buttons. You can play, pause and stop the playback of the
contents, using the PLAY/PAUSE/SOP buttons. Use the colored buttons to delete
and rename the recordings.
- Use the colored buttons to replace, copy, rename or delete files on the storage under
„Disk Manager” menu.
- In „EBook” menu, you can display E-books
During playback of all multimedia contents, press the „MENU” button to activate the
„Media Center”/”Multimedia Configuration” menu. This allows you to select:
- MP4 subtitle language,
- language of the e-book
- the type of movie, music, photo repeat you are playing
• repeat the entire library
• repeat playback of the selected movie or
• switch off repeat
- Background music switched on/off
- In „SlideTime” menu, you can set, how often the displayed photos change (3-6-
9-12-15s)
- In „Effect” menu, you can set the image changing according to the desired effect.
• Vertical transition
• WindowH
• WipeEdgeToCenter
• Shuffles
• NONE
• WipeTop
• WipeBottom
• WipeLeft
• WipeRight
• WipeLeftTop
• WipeRightTop
• WipeLeftBottom
• WipeRightBottom
• ExtendFromCenterH
• ExtendFromCenterV
• CompressToCenterH
• CompressToCenterV
Recording media content:
Plugging an external mass storage device into the USB port makes it possible to use
the Time shift (Pausing the projected show, and restarting it later -TimeShift) or use
of continuous recording in a projected show. The recording is made in.TSV format.
If you run out of external storage, the recording process will be interrupted.
Both recording features require a larger (>2GB) USB2.0 pendrive or HDD.
Setting timeshift timeout:
1. Use the „RIGHT” / „LEFT” buttons to select the „Media Center” option
2. Press the „UP”/ „DOWN” button to select „Setting the recorder” element, then press
the „OK” button to activate time shift settings.
- In the „Files size” menu, you can set the size of the recorded file to Auto,
1G, 2G, 3G, 4G (GB)
- „Timeshift”: Off, Auto or Pause
- „Timeshift Length”: Auto, 30mint, 1hr, 2hr
- „Timeshift to Record”: Off, On
3. Press the „EXIT” button to exit
Installation:
You can activate the Time Shift function by pressing the “Pause” button while watching
a program. You will see an image on the TV screen. Press Play to start playback, with
the following options available: Press the „Pause” button to pause playback.
• Press the „FORWARD” button to fast forward the playback
• Press the „BACK” button to rewind the playback
Stop time shift recording
Press the „STOP” button to stop Timeshift. When you turn your timer off, the recording
is deleted from the mass storage.
Using continuous recording:
The remote control can be started by pressing the REC button. By pressing the REC
button again, you can set the length of the recording. By pressing the STOP button
it can be stopped. Double-pressing the MENU button will check the recording time.
When a recording is started, another channel can be selected for further viewing, the
recording continues according to the parameters that have been started.
IPTV: this feature is not available on HD T2 type appliance.
Onlinevideo: this feature is not available on HD T2 type appliance.
8
