18
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
PORTABLE PARTY SOUND BOX
FULL LED front panel, can be disabled ● Selectable light effects following the rhythm of music ● Digital red LED display ● Wireless BT
TWS connection ● Listen to music from a mobile device, computer ● MP3/WMA/WAV compatible from a USB/microSD device ● KARAOKE
and microphone echo control ● FM radio with automatic station search ●
∅
6.3 mm microphone jack ●
∅
3.5 mm AUX audio input ● Built-in
battery with automatic charging ● Expected charging / operating time: ~12h / ~20h ● Mains independent, designed for battery operation ●
Lightweight, compact, portable design ● 2-way bass-reflex, 2x200mm bass boost, 80W ● Remote control power supply: CR 2025 (3V) button
cell, included ● Accessories: remote control, mains charger
APPLICATION
The two-way sound box with active bass-reflex is primarily recommended for hobby, house party applications. Compact, easy to carry design. Its built-
in battery allows it to be operated without mains power. Can be directly connected to external devices such as: mobile phones, PC, CD/DVD players,
musical instruments, and microphone. Along the loud-speakers the device also includes an amplifier and a multimedia player with FM/BT/MP3/WMA/
WAV compatibility. Includes remote control and mains charger.
CHARGING THE BATTERY
The battery must be charged before first use. Connect the included charger - and only the original one - to the sound box (
DC INPUT
), then connect it
to the mains power outlet and leave the device turned off. In charging mode the
CHARGE LED
is lit beside the input, while the depleted and charged
battery symbol flashes alternately on the display. When charging is finished the flashing of the symbols stops. Disconnect the charger from the
sound box and the mains outlet and start using the device. The charging time for a fully discharged battery is approximately 12 hours. This provides
approximately 20 hours of continuous operation from battery at medium volume. This will depend on the volume setting, the mode selected and the
ambient temperature. Tests were performed with radio playing at room temperature with LED lights off.
● In general it is not recommended to charge the device while it is in use. This lengthens charging time and may cause excess noise and overheating.
Charging while in use may also deteriorate the quality of radio reception.
● When finished with charging or use, turn off the device using the button on top of the sound box, then disconnect it from the mains outlet.
● This equipment is designed to operate on battery power, recharging after use is recommended.
● When the unit is switched off, the automatic battery charger will function. Therefore remove the charger after charging is complete.
● For longer battery life, keep the battery charged even when not in use!
● The battery used is of the lithium-ion type. It does not require maintenance. At the end of its life it can be replaced by a professional after removing
the control panel. The cover is secured by screws.
COMMISSIONING
Make all connections with the system disconnected from the power supply! Make sure that both the sound box and the devices to be connected are
switched off. Make sure that the connections and polarity of the connectors are as specified. Keep the microphone cable and the audio connection
cable away from the mains cable.
Turn the device on with the button on the
control panel to activate
BT
mode. If the device was previously turned off using a remote controller, then it
can be turned on with the remote controller as well. If the device was turned off using the button on top of the sound box, it can only be turned on with
the same button.
● Neither the remote controller, nor the button on the device will completely power off the device.
● The built-in automatic battery charger remains active while the device is turned off.
● For complete power off - when you are finished using the device - disconnect the charger from the mains power outlet and the sound box.
VOLUME CONTROL AND FUNCTION SWITCHING
Volume can be controlled using the lit
VOLUME
knob or the
VOL+/VOL-
buttons on the remote controller.
The desired function can be selected using the button (or
MODE
button on the remote controller):
LINE – FM RADIO – BT – USB – microSD -
LINE…
Available multimedia functions are: connection of external equipment (LINE / AUX INPUT), connection of microphone (MIC IN), wireless BT connection
(BT), USB/microSD MP3 player. The available features may differ when using different signal sources. No function is available for an unconnected
device. For example MP3 mode without USB or microSD storage connected.
controls of the multimedia unit
input jacks
PREV
step
MIC
external microphone
PLAY/PAUSE
play / pause
AUX (LINE)
audio input
NEXT/TWS
step / TWS-mode
USB
USB storage device
X – B A S S
bass-sound
microSD
memory card
StandBy
On / Off
CHARGE LED
charging signal LED
INPUT
BT / USB / SD / LINE / FM
DC INPUT
charger adapter
MENU
microphone and EQ menu
LED
LED On / Off / Modes
