4
32. Heating elements / heated surfaces of the appliance are still warm for a while after the unit has been switched off.
33. Switch off the appliance after each use, and unplug the power cable! Let the appliance cool, clean it and
store it at a dry, cool place.
34. It is prohibited to immerse the appliance to water.
35. Due to continuous improvements the design and specifications may change without any prior notice.
36. The actual instruction manual can be downloaded from www.somogyi.hu website.
37. We don’t take the responsibility for printing errors and apologize if there’s any.
38. The unit is intended for household use only. No industrial use is permitted!
CAUTION: RISK OF ELECTRIC SHOCK!
Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged,
immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the
manufacturer, its service facility or similarly qualified personnel.
INSTALLATION
1. Before installation, carefully remove packaging, and make sure not to damage the unit or the connecting
cable. If you find any damage, the unit must not be operated!
2. Wipe the stainless steel soleplate of the iron with a damp cloth first, then with a dry one.
3. The thermostat dial must be in OFF position.
FILLING THE WATER TANK
a.
The power plug has to be unplugged from the outlet.
b.
Turn off the steaming function on the iron (4).
c.
Fill the plastic measuring cup up to its max marking with deionized or distilled water. Do not use tap water!
d.
Open up the cap of the water tank.
e.
By holding the handle with one hand keep the iron in such position so as to have the opening of the
water tank horizontally.
f.
Pour the water to the tank from the measuring cup with your other hand. Only fill the water tank of the
iron up to the max marking. To do this, you need to use the plastic measuring cup more than once.
g.
Shut the cap of the water tank.
4. Stand the iron on its heel on a flat, stable surface.
5. Set the thermostat dial to the appropriate stage for the cloth.
6. Connect the unit into a standard grounded wall socket.
7. The soleplate of the iron will start to warm up, which will be indicated by the red control lamp. When the red
light goes out, the iron has reached the adjusted temperature.
SELF-CLEANING FUNCTION
1. Fill up the water tank as it is described in the paragraph of FILLING THE WATER TANK.
2. Stand the iron on its heel and set the thermostat dial (9) to maximum temperature.
3. After the red indicator light had gone out, turn the iron to horizontal position above a sink, bathtub or shower
tray.
4. Turn the steam switch (4) totally to the right, till the marking. Hold the switch in this position.
5. Big amount of steam and water stones will leave through the holes of the soleplate.
6. When the indicator lamp starts lighting, stand the iron to vertical position, till it heats up again. After that, you
can continue the descaling in horizontal position.
7. If you have finished cleaning, then switch off steaming by turning the steam switch (4) to 0 position. Let the
iron cool down. (min. 15 minutes)
