24
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
FREE STANDING ELECTRIC FIREPLACE
FEATURES
• free standing electric fireplace, with built-in fan heather for heating indoor air • white MDF board • electric thermostat • weekly program
• adaptive switching control • independently switchable mood lighting • 1000 W / 2000 W heating power • overheating protection
OPERATION
The appliance can be operated with the switches underneath the foldable magnetically closing lid on its front side. Around the warm air
outlet, the casing and the glass can be hot! Touch the foldable grid only in front of its part above the warm air outlet and the buttons.
Touch the appliance’s switches from the front, so that your hand does not cross the warm air outflow, because it can be hot.
When you switch it on for the first time, you may feel a slight smell, which is a natural phenomenon. It is not dangerous and it slips by
soon.
Set the main switch (4) to I (on) position, then the appliance emits a short beep. The appliance can be switched on or off using the
I/O push-button on
the front of the appliance
. By being switched on, the flame effect will begin to operate only, without any heating
function. Holding the I/O button pressed will toggle among five brightness settings of the flame effect. You can switch it on, select from
the 7 mood lighting colors or switch off the appliance with the BACKLIGHT labeled mood lighting switch (6.) You can select the desired
heating stage with the 1000 W or 2000 W push-buttons, or you can switch heating off with them. The appliance can be switched off
anytime using the I/O push-button.
The ON / OFF button (8) on the
remote controller
functions in the same way as the I/O button on the appliance. You can select the
desired heating stage with the remote control’s 1000 W / 2000 W button (12), or you can switch heating off with it. You can switch it on,
select from the 7 mood lighting colors or switch off the function with the BACKLIGHT labeled mood lighting switch (13).The currently
selected stage can be checked on the appliance. The DIMMER button (14) can be used to adjust the brightness of the flame effect in
5 increments.
To set the
date and the time
, turn on the unit with a remote control ON / OFF button (8), then press the DATE / TIME button (9). On
the remote control selection button (10), press the “▲” or “▼” buttons. Press the DATE / TIME button again (9), then set the clock
using the selector dial “+” and “-” buttons. Press the DATE / TIME button again (9), then set the minute using the selector dial “+” and
“-”buttons. Press the selector key (10) to store the set time by pressing the “OK” symbol.
SUN
MON
TUE
WED
THU
FRI
SAT
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Press the IC button on the remote control (11) for automatic heating control. If “AUTO” (23) appears on the display of the product, the
automatic heating selector is activated. Depending on room temperature and set temperature, the appliance automatically selects the
heating stage. To set the desired temperature, press the “+” or “-” symbol on the remote control selection button (10). Press the “+”
button to increase the temperature by pressing the “-” button to reduce the desired temperature in the range of 15 ° C to 30 ° C. Press
the remote control IC button (11) again to turn off the function, then AUTO (23) can not be read on the display.
Timer function, adaptive ON / OFF control
he unit can store up to 10 programs at the same time, for each program you can set the on / off time. The maximum length of each
program can be set to 23 hours and 50 minutes.
The product has adaptive switch-on regulation, it is able to predetermine the optimum time to start the heating process and start the
heating process in order to reach the set temperature at the desired time.
Set the timing
1. Press TIMER SET on the remote control (17)
2. Use the “+” or “-” symbols on the selector button (10) to select the program number (19)
3. Press TIMER SET on the remote control again (17)
4. Use the “▲” or “▼” symbols of the multi selector (10) to move the cursor (26) to the desired day (27) and press the “+” symbol to
select it. Press “-” to remove previously selected days
5. Press TIMER SET on the remote control again (17)
6. Use the “+” or “-” symbols of the multi-selector (10) to select the power-on time (hours) (22)
7. Press TIMER SET on the remote control again (17)
8. Use the “+” or “-” symbols on the selector button (10) to select the time (minutes) (22)
9. Press TIMER SET on the remote control again (17). The display will show “OFF” (20)
10. Use the “+” or “-” symbols on the selector button (10) to select the time (hours) (22)
