5
27. Do not use extension cords or power strips to connect the unit.
28. The appliance should be located so as to allow easy access and removal of the power plug.
29. The unit is intended for household use, no industrial use is permitted.
30. Due to continuous improvements the design and specifications may change without any prior notice.
31. The actual instruction manual can be downloaded from www.somogyi.hu website.
32. We do not take the responsibility for printing errors and apologize if there is any.
DO NOT COVER!
COVERING THE UNIT CAN CAUSE OVERHEATING, FIRE OR ELECTRIC SHOCK.
CAUTION: RISK OF ELECTRIC SHOCK!
Do not attempt to disassemble or modify the unit or its accessories. In case any part is damaged,
immediately power off the unit and seek the assistance of a specialist.
INSTALLATION
1. Before switching on for the first time, carefully remove the packaging material taking care not to damage the
appliance and power cable. Do not use the product if it is damaged in any way.
2. The unit may only be used indoors in dry conditions.
3. To ensure the proper operation of the appliance, you have to arrange for the free circulation of hot air. Therefore,
please, take into consideration the minimal placement distances shown on
Figure 2.
4. The main switch of the appliance (3) must be set in „0” (OFF) position.
5. The appliance’s power plug can be rotated in 90 degrees after pressing the power plug latch (10) button. The
appliance can only be operated, if the power plug is fixed in one of the two end positions.
6. Connect the unit’s power cable into a standard grounded wall outlet. This completes the setup the unit, which is
ready for operation.
CLEANING, MAINTENANCE
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the
manner of use and degree of contamination.
1. Switch off and power off the unit by unplugging it from the electric outlet before cleaning.
2. Let the appliance to cool down (min. 30 minutes).
3. Use a vacuum cleaner to clean the air inlet (1) and outlet (2) openings.
4. Use a slightly moistened cloth to clean the unit’s outer surface. Do not use aggressive cleaners. Avoid getting
water inside onto the electric components of the appliance.
TROUBLESHOOTING
Malfunction
Possible solution
The appliance does not heat.
Check the section on overheating protection.
Check the power supply.
Check the section on the thermostat.
Overheating protection activates frequently.
Clean the appliance.
