3
Telis 6 Chronis RTS
Copyright © 2010 - 2016 Somfy SAS. All rights reserved.
ZH
5. 调试
在使用 Telis 6 Chronis RTS 之前,我们建议提前使用单独的 Telis 1 RTS 控制开关为每个电机编
程,同时每台电机需要预先设置限位。但是和任何 RTS 无线电发射器一样,Telis 6 Chronis RTS
可用于电机调试操作(如限位调整等)。
本手册仅描述使用单个 RTS 控制开关例如 Telis 1 RTS 进行的调试。有关不同 RTS 控制开关的调
试,请参见相应手册。
1
2 分钟未使用后,Telis 6 Chronis RTS 屏幕自动进入休眠模式。
屏幕关闭后,请先按任意按钮将其打开。
编辑设置时,您随时可以通过按住选择按钮 (
) 返回操作模式(自动或手动)。只有确认的参数
会被保存。
5.1. 电池安装
- 卸下 Telis 6 Chronis RTS 背面的电池盖。
- 按照极性标识装入两节 AAA (LR3) 电池。
- 将电池盖盖回 Telis 6 Chronis RTS。
- 按下任一按钮激活 Telis 6 Chronis RTS。
请不要使用充电电池。
当显示屏上出现 ( )符号时,请更换电池。
如果长期没有电源(电池电量耗尽或被取出),无线电
发射器的一般参数需要重新设置。但自动命令还会储存
在内存中。
5.2. 设置无线电发射器的一般参数
第一次安装电池时会直接激活“无线电发射器设置”模式。SET 和 YEAR 会显示在屏幕上,而且会
闪烁(这是要设置的第一个参数)。
在长时间没有电源供应后,选择自动模式时还会直接激活“无线电发射器设定”模式。
在各步骤中,要设置的参数都会闪烁。
- 按箭头按钮(
或
)更改参数
(按住按钮可迅速滚动参数)。
- 要 保 存 参 数 并 转 到 下 一 个 参 数 , 轻 按 选 择 按
钮 (
)。
- “无线电发射器设置”模式可随时通过按住选择
按钮 (
) 关闭。只有确认的参数会被保存。
s 2
2 x LR03
AAA 1,5 V
5065945B_Chronis_6_RTS print.pdf 41
7/16/2020 9:49:49 AM
5065945B_Chronis_6_RTS print ok.pdf 41
7/16/2020 9:52:32 AM
Summary of Contents for Telis 6 Chronis RTS
