www.tecnoshades.com
Step 1. Press the programming button with a thin tool on the
already registered remote/channel for four seconds, until the
motor cycles.
Step 2. Select already registered remote/channel you want
to delete and press its PROG button for two seconds, until the
motor cycles, the remote/channel has been deleted.
Modify the upper limit
Step 1. Press the PROG button for four seconds, until the
electric motor cycles.
Step 2. Press the UP and STOP button for two seconds, until
the motor cycles.
Step 3. Press the UP or DOWN button then stop the motor
where you want to set the new limit.
Step 4. Press the PROG button for two seconds until the
electric motor cycles.
Modify the lower limit
Step 1. Press the PROG button for four seconds, until the
electric motor cycles.
Step 2. Press the DOWN and STOP button for two seconds,
until the motor cycles.
Step 3. Press the UP or DOWN button then stop the motor
where you want to set the new limit.
Step 4. Press the PROG button for two seconds until the
electric motor cycles.
DELETE A REMOTE CONTROL
USER MODE
SET THE LIMITS OF STROKE
1.
2.
Cycle
Cycle
Cycle
4 seg.
2 seg.
2 seg.
o
1.
1.
2.
3.
4.
2.
3.
4.
Note:
A remote cannot delete itself.
Note:
In the adjustment process the electric motor works in stepping mode.
Ciclo
4 seg.
2 seg.
Cycle
4 seg.
2 seg.
2 seg.
o
