Version 2.1
VIOLET:
Antenna I/O
YELLOW Function Indicator LEDs
S
: General Activity Indicator
D
: Board On
-
Board Diagnostics LEDs
Wind: Activity Indicator
•
ON
= Sensor has been triggered.
•
FLASHING
= Sensor is waiting 15 minutes post
-
trigger, as preset by the
manufacturer.
Rain: Activity Indicator
•
ON
= Sensor has been triggered.
FLASHING
= Sensor is waiting 15 minutes post
-
trigger, as preset by the
manufacturer.
Snow: Activity Indicator
•
ON
= Sensor has been triggered.
•
FLASHING
= Sensor is waiting 15 minutes post
-
trigger, as preset by the
manufacturer.
ORANGE:
Program button and motor indicator LEDs
•
The button is used to program motors or reset the board to factory defaults.
•
The LEDs are indicate which motor is being programmed.270
•
BLUE:
DIP Switches
•
1: Encoder for S1
•
2: Encoder for S2
•
4: Temperature Sensor Switch
•
5: Wind Sensor Switch
RED:
Main 24v Input Connector
•
Supplies board with 24 volts of DC power from the converter.
BROWN:
Motor Connectors
CREAM: Wired Rain Sensor Connector
•
What follows is a diagram portraying where to connect motor wires. There are markings on the board indicating where positive (+) and negative (
-
) terminals are.
*Please Note that only the blue and brown wires are used for this system.
Control Board Diagram
S2
S1
(Blue)
(Blue)
(Brown)
(Brown)
