Version 2.1
Miscellaneous Programming
1. Select one of the desired zones on the remote.
2. On the back of the remote, press and hold the Programming button until the motor jogs.
3. Select the zone one the remote that you want to designate as the
“
All
”
zone (Zone 5).
4. Press the Programming button briefly.
5. The first zone is programmed. Repeat the process for the other zones.
Programming an
“
All
”
Zone
Copying Remotes
1. Select the appropriate zone on the remote you want to copy.
2. Press and hold the programming button on the back of the remote.
3. On the remote that requires programming, select the desired zone and briefly press the pro-
gramming button on the back.
4. The zones have been copied. Repeat the process for the desired number of zones.
•
*NOTE: If the
“
All
”
zone will not copy correctly, you will likely need to program the
“
All
”
zone
as referred to above
Factory Reset
1. Resetting the board to factory setting is an incredibly simple procedure, all you have to do is press and
hold the PROG button for at least 10 seconds until all indicator LEDs flash and turn off. Unplug and plug in.
