SOMFY SGS 501, Operating And Installation Manual

Page: 12 / 72

8
Copyright © 2013 Somfy SAS. All rights reserved.
Renfort
Patte de
fixation
Tools and hardware required
„
Tools
„
Hardware
The hardware elements are not supplied with the product.
Use hardware elements suitable for the motor mounting bracket.
For securing the... Quantity
BRACKETS TO THE PILLARS/WALLS
Hardware adapted to the material of the pillar/wall (screws, studs, chemical seals, etc.):
- diameter: 8 to 10 mm
- hex head
6
Washers :
- internal diameter: 8 to 10 mm
- external diameter: 16 to 20 mm
Nuts :
- diameter: 17 mm
6
BRACKETS TO THE GATE LEAVES
Hardware adapted to the material of the gate leaf reinforcement:
- diameter: 8 mm
- length adapted to the thickness of the gate leaf reinforcement
6
Washers supplied
- internal diameter: 8 mm
- external diameter: 22 mm
6
CONTROL UNIT
Hardware
adapted to the material of the pillar/wall
- screw diameter: 3.5 to 4.5 mm - raised or flat-head screws
- Type "S" rawl plug for concrete: S5, S6 or S8
4
PH PZ2
„
Reinforcements
The motors must be secured to the horizontal reinforcements for the gate leaves.
These reinforcements must ideally be placed 1/3 of the way up the gate.
If there are no reinforcements, use metal reinforcement plates approximately 4 mm thick.
„
Gate
Your gate is in good condition: it opens and closes normally with ease.
It remains horizontal throughout its travel. It opens inwards towards your property.
17
Drill
Hammer
Spirit level
Tape measure
Pencil
Phillips screwdriver
Flat-blade screwdriver
Allen key, 2.5 in
diameter
Open-end spanner
Socket spanner
Cutting pliers
Stripping pliers
Pre-installation checks
Junction box IP 55
Mounting bracket
Reinforcement