EQUINOX INTEGRATION GUIDE
©Vantage Equinox
Somfy: RS-485 SDN 2.0
page 7 of 7
XI. Tech Notes
Things to Know / Gotchas
If a shade is experiencing difficulty calibrating, change the shade to a different position and attempt recalibration.
If a shade appears stuck during calibration, press the open or close button to reanimate it.
You must use the limit setting tool before the shade can be used in calibration.
If you do not have access to the group addresses, leave the group address field empty. It will call all of the shades
individually.
XII. Design Center Task Procedure Table
The following table shows the most common procedures that are available for programming Design Center tasks with Somfy Shades.
Tasks can be assigned to keypad buttons and Equinox scenes.
Available Task Procedures
Category
Folder
Procedure
Shades/Motors Shades
Close Blind
Open Blind
Set Blind Position
Stop Blind
