EN
Rollixo Smart io
32
Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved.
3
INSTALLATION
3.1
Mounting the receiver
> > > Illustration 4
CAUTION
Ensure the mains power supply is at the correct distance.
1]
Secure the bracket to the wall.
2]
Secure the housing to the bracket.
3.2
Wiring the motor
> > > Illustration 5
DANGER
Risk of electrocution
The receiver must not be connected to the mains power supply during connection to the motor.
The motor cable must be placed in the receiver's 230 V insulation area.
1]
Connect the motor to the receiver in accordance with the wiring shown below:
Receiver terminal
Motor wire
4
Yellow/green
5
Black
6
Blue
7
Brown
NOTICE
The motor's direction of rotation shall then be checked and reversed if necessary.
3.3
Anti-fallback wiring
> > > Illustration 6
DANGER
The anti-fallback device must be wired.
3.4
Power supply wiring
> > > Illustration 7
1]
Connect the neutral (N) to terminal 1 of the receiver.
2]
Connect the live (L) to terminal 2 of the receiver.
3]
Connect the earth wire to terminal 3 of the receiver.
4]
Lock the power supply cable with the cable clamp provided.