Rollixo Smart io
PL
Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved.
71
Strefy niebezpieczne: jakie środki należy podjąć, aby je wyeliminować?
RYZYKO
ROZWIĄZANIE
STREFA 1
Ryzyko przygniecenia przy zamykaniu
między podłożem a dolną krawędzią
pancerza bramy
Wykrycie przeszkody przez listwę czuj-
nikową.
Koniecznie potwierdzić, że system wy-
krywania przeszkód jest zgodny z anek-
sem A normy EN 12 453
W przypadku działania bramy w trybie
automatycznego zamykania należy za-
instalować fotokomórki.
STREFA 2
Ryzyko zakleszczenia pomiędzy skrzyn-
ką i pancerzem bramy
Wyeliminować wszelkie szczeliny ≥ 8
mm lub ≤ 25 mm pomiędzy skrzynką a
pancerzem bramy.
STREFA 3
Ryzyko skaleczenia i zakleszczenia mię-
dzy lamelami pancerza bramy w szczeli-
nach o wymiarach wahających się od 8
mm do 25 mm
Wyeliminować wszelkie wystające ele-
menty oraz wszystkie ostre krawędzie
powierzchni pancerza bramy
Wyeliminować wszystkie otwory o wy-
miarach ≥ 8 mm lub ≤ 25 mm
STREFA 4
Ryzyko zakleszczenia pomiędzy pro-
wadnicami i pancerzem bramy
Usunąć wszystkie ostre krawędzie pro-
wadnic
Wyeliminować wszystkie szczeliny ≥ 8
mm pomiędzy prowadnicami a pance-
rzem bramy
1.5
Instalacja elektryczna
NIEBEZPIECZEŃSTWO
Instalacja zasilania elektrycznego musi być zgodna z normami obowiązu-
jącymi w kraju, w którym zainstalowano napęd i musi być wykonana
przez osoby posiadające odpowiednie kwalifikacje.
Układ elektryczny musi być przeznaczony wyłącznie do napędu i wyposa-
żony w zabezpieczenie składające się z następujących elementów:
bezpiecznik lub samoczynny wyłącznik 10 A,
i urządzenie typu różnicowego (30 mA).
Należy zapewnić możliwość wielobiegunowego odłączania zasilania. Wy-
łączniki wielobiegunowe przewidziane do odłączania zasilania urządzeń
stałych muszą być podłączone bezpośrednio do zacisków zasilania oraz
znajdować się w bezpiecznej odległości od styków na wszystkich biegu-
nach, aby zagwarantować całkowite odłączenie zasilania w warunkach
przepięcia kategorii III.
Przewody niskiego napięcia wystawione na działanie warunków atmosfe-
rycznych muszą być przynajmniej typu H07RN-F.
Zalecane jest zamontowanie odgromnika (konieczne maksymalne napię-
cie szczątkowe 2 kV).