Rollixo RTS
Copyright © 2012 Somfy SAS. All rights reserved
7
EN
Checking the direction of rotation of the motor and adjustment of the motor end limits
3
4
2
1
Prog
STOP
[2].
Press button or to check the motor's direction of rotation.
•
If the motor's direction of rotation is correct, move on to step [3] of the
motor end limit setting procedure.
•
If the direction of rotation is incorrect, press button
STOP
until the motor's
up and down movement occurs, check the motor's direction of rotation
again and move on to step [3] of the motor end limit setting procedure.
[1].
Press simultaneously on the and buttons until the motor's up and
down movement occurs to enter motor adjustment mode.
Indicator light 1
flashes slowly.
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
Correct direction
of rotation
Incorrect direction
of rotation
[3].
If the motor end limits are already set, move on to step [8] to exit motor
adjustment mode.
If the motor end limits are not set, check that the motor is released: the two
push-buttons should be pressed.
Note
: The motor end limits can also be set with a setting tool (ref. 9015971).
In this case, set the motor end limits with the cable then move on to step
[8] to exit motor adjustment mode.
oR
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
[5].
Press the motor's upper end limit push-button.
on
[6].
Press button to position the garage door in the lower position.
Adjust the low position with buttons and .
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
[4].
Press button to position the garage door in the upper position.
Adjust the upper position with buttons and .
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
